APC Power-Saving Back-UPS Pro 1200, 230V - BR1200GI

BR1200GI Features

APC Power-Saving Back-UPS Pro 1200, 230V

• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Adjustable voltage-transfer points
  Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
• Power-saving outlets
  Automatically cuts power to idle equipment to conserve electricity.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Telephone dataline surge protection
  Provides protection of connected equipment from power surges traveling on telephone lines.
• Transformer-block spaced outlets
  Protect equipment with input transformer blocks without blocking access to other receptacles.
• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Output

• Output power capacity
  720Watts /  1.2 kVA
• Max Configurable Power (Watts)
  720Watts /  1.2 kVA
• Nominal Output Voltage
  230V
• Output Frequency (sync to mains)
  50 Hz, 60 Hz
• Output Frequency (not synced)
  60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal
• Load Crest Factor
  3 : 1
• Topology
  Line Interactive
• Waveform type
  Stepped approximation to a sinewave
• Output Connections
  (5) IEC 320 C13 (selector_surgetitle)
  (5) IEC 320 C13 (Battery Backup)
  (2) IEC Jumpers (Battery Backup)
• Transfer Time
  10ms typical : 12ms maximum

Input

• Nominal Input Voltage
  230V
• Input frequency
  50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections
  IEC-320 C14
• Input voltage range for main operations
  176 - 294V
• Input voltage adjustable range for mains operation
  156 - 300V

Batteries & Runtime

• Battery type
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time
  8hour(s)
• Replacement Battery
  APCRBC124
• Expected Battery Life (years)
  3 - 5
• RBC Quantity
  1
• Runtime
  View Runtime Graph
  View Runtime Chart
• Efficiency
  View Efficiency Graph

Communications & Management

• Interface Port(s)
  Optional Simple Signalling RS232 cable , USB
• Control panel
  Multi-function LCD status and control console
• Audible Alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Surge energy rating
  441Joules
• Data Line Protection
  Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
• Filtering
  Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous

Physical

• Maximum Height
  301mm , 30.1CM
• Maximum Width
  112mm , 11.2CM
• Maximum Depth
  380mm , 38.0CM
• Net Weight
  11.6KG
• Shipping weight
  13.2KG
• Shipping Height
  387mm , 38.7CM
• Shipping Width
  238mm , 23.8CM
• Shipping Depth
  488mm , 48.8CM
• Color
  Black
• Master Carton Units
  1.0
• Units per Pallet
  24.0
• SCC Codes
  1073130426875 5

Environmental

• Operating Temperature
  0 - 40 °C
• Operating Relative Humidity
  0 - 95 %
• Operating Elevation
  0-9000meters
• Storage Temperature
  -15 - 45 °C
• Storage Relative Humidity
  0 - 95 %
• Storage Elevation
  0-15000meters
• Audible noise at 1 meter from surface of unit
  45.0dBA

Conformance

• Approvals
  A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV
• Equipment protection policy
  Lifetime : 200000 AUD, Lifetime : 150000 Euros, Lifetime : 75000 GBP
• Standard warranty
  2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status

• RoHS
  Compliant
• REACH
  REACH: Contains No SVHCs
• PEP
  Available in Documentation tab
• EOLI
  Available in Documentation tab